Дънна платка GIGABYTE B250-HD3P, B250, DDR4 2400/2133 MHz, VGA, DVI, HDMI, DP, M.2 Socket, SATA Express, USB 3.1, LGA1151

CPU 1.Support for 7thand 6th generation IntelR CoreT i7 processors/ IntelR CoreT i5 processors/IntelR CoreT i3 processors/ IntelR PentiumR processors/IntelR CeleronR processors in the LGA1151 package
2.L3 cache varies with CPU
(Please refer "CPU Support List" for more information.)
Chipset 1.IntelR B250 Express Chipset

Memory 1.4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
2.Dual channel memory architecture
3.Support for DDR4 2400(O.C.)* / 2133 MHz memory modules
* To support 2400 MHz or XMP memory, you must install a 7th generation processor.
4.Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5.Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6.Support for Extreme Memory Profile (XMP) memory modules
* To support 2400 MHz or XMP memory, you must install a 7th generation processor.
(Please refer "Memory Support List" for more information.)
Onboard Graphics Integrated Graphics Processor- IntelR HD Graphics support: 1.1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
2.1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI-D port does not support D-Sub connection by adapter.
3.1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz
* Support for HDMI 1.4 version.
Support for up to 3 displays at the same time
Maximum shared memory of 1 GB
Audio 1.RealtekR ALC892 codec
2.High Definition Audio
3.2/4/5.1/7.1-channel
4.Support for S/PDIF Out

LAN 1.IntelR GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1.1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2.2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)
* The PCIEX4_1 slot shares bandwidth with the SATA Express connector and the PCIEX1_2 slot. When the SATA Express connector is populated, the PCIEX4_1 slot operates at up to x2 mode. When the PCIEX1_2 slot is populated, the PCIEX4_1 slot operates at up to x1 mode.
* The PCIEX4_2 slot shares bandwidth with the M.2 connector. When the M.2 connector is populated, the PCIEX4_2 slot becomes unavailable.
3.2 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
4.1 x PCI slot

Multi-Graphics Technology 1.Support for AMD Quad-GPU CrossFireXT and 2-Way AMD CrossFireT technologies (PCIEX16, PCIEX4_1)

Storage Interface Chipset: 1.1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support)
2.1 x SATA Express connector
* The SATA Express connector is not compatible with regular SATA devices.
3.6 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.

USB Chipset+ASMediaR ASM2142 USB 3.1 Gen 2 Controller: 1.1 x USB Type-CT port on the back panel, with USB 3.1 Gen 2 support
2.1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
Chipset: 1.6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB headers)
2.6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors 1.1 x 24-pin ATX main power connector
2.1 x 8-pin ATX 12V power connector
3.1 x M.2 Socket 3 connector
4.1 x SATA Express connector
5.6 x SATA 6Gb/s connectors
6.1 x CPU fan header
7.3 x system fan headers
8.1 x front panel header
9.1 x front panel audio header
10.1 x S/PDIF Out header
11.1 x USB 3.1 Gen 1 header
12.2 x USB 2.0/1.1 headers
13.1 x Trusted Platform Module (TPM) header
14.1 x serial port header
15.1 x parallel port header
16.1 x Clear CMOS jumper

Back Panel Connectors 1.1 x PS/2 keyboard/mouse port
2.1 x D-Sub port
3.1 x DVI-D port
4.1 x HDMI port
5.1 x USB Type-CT port, with USB 3.1 Gen 2 support
6.1 x USB 3.1 Gen 2 Type-A port (red)
7.4 x USB 3.1 Gen 1 ports
8.2 x USB 1.1 ports
9.1 x RJ-45 port
10.6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In)

I/O Controller 1.iTER I/O Controller Chip

H/W Monitoring 1.Voltage detection
2.Temperature detection
3.Fan speed detection
4.Overheating warning
5.Fan fail warning
6.Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.

BIOS 1.2 x 64 Mbit flash
2.Use of licensed AMI UEFI BIOS
3.Support for DualBIOST
4.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features 1.Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
Ambient LED
AutoGreen
BIOS Setup
Color Temperature
Cloud Station
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
Platform Power Management
Smart Backup
Smart Keyboard
Smart TimeLock
System Information Viewer
USB Blocker
V-Tuner
2.Support for 3TB+ Unlock
3.Support for Q-Flash
4.Support for Xpress Install

Bundle Software 1.NortonR Internet Security (OEM version)
2.IntelR OptaneT Memory Ready
3.cFosSpeed

Operating System 1.WindowsR 10 64-bit (for 7th Generation IntelR Processors)

2.WindowsR 10 64-bit / WindowsR 8.1 64-bit / WindowsR 7 32-bit / 64-bits (for 6th Generation IntelR Processors)
* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.

Form Factor 1.ATX Form Factor; 30.5cm x 22.5cm

Remark 1.Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
2.Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.